H&R Wheel Spacers for Nissan 300ZX (1987-1996) 5mm 10mm 15mm 20mm 25mm

Fitment Information

• Nissan 300ZX (1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996)

Specs & Features

• Bolt Pattern: 5/114.3
• Center Bore: 66.2
• Bolt or Stud: Stud
• Thread Type: 12x1.25
• Sold as a pair
• Series Option
  • DRM Series - DRM Series spacers bolt to the hub with existing wheel studs and special nuts (included.) Wheel is bolted to new DRM wheel studs.
  • DRS Series - DRS Series spacers fit between the wheel and hub, and require exchanging the existing wheel studs for longer ones (studs are included.)

Product Description

Wider is Better! H&R TRAK+ Wheel Spacers move your wheels and tires outwards so they are more flush with the fender‚ instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+ you can fill the gap in your fenders and GO WIDE!

TRAK+ Wheel Spacers are manufactured from a special proprietary alloy specifically developed for H&R that is lighter and has a higher tensile strength than 6061-T6 billet aluminum. H&R TRAK+ Wheel Spacers are hubcentric and feature a full contact hub‚ just like the factory hub‚ for even load force distribution and lateral support.

Important 

5mm / 5mm Black / 10mm / 10mm Black / 15mm / 15mm Black / 20mm 20mm Black DRS Wheel Spacer:

• Depending on model, axle and year, Nissan vehicles have different diameters in the shoulder of the studs. The following list provides notes and measurements of the shoulder studs required for installation. The wheel spacers shown in the catalog will be supplied with shoulder bolts d = 14.25. If you need d = 12.85, please add a “1” at the end of the part number.
  DRS Wheel Spacers - Nissan
  DRS wheel spacers / required DRS shoulder
  Vehicle    Model    Shoulder    Front Axle/Shoulder    Rear Axle
  SENTRA    B13    GA 16 + SR20 DE    large 14.25mm    large 14.25 mm
  100    NX    B13 GA 16 + SR 20 DE    large 14.25 mm    large 14.25 mm
  200 SX    S13    CA18 T    small 12.85 mm    small 12.85 mm
  200 SX    S14    SR 20 DET    large 14.25 mm    small 12.85 mm
  300 ZX    Z32    VG 30 DTT    large 14.25 mm    small 12.85 mm
  MAXIMA    J30    up to 10/91    small 12.85mm    small 12.85 mm
  up to 12/94    large 14.25 mm    small 12.85 mm
  from 01/95    large 14.25 mm    large 14.25 mm
  MAXIMA    A32    VQ 20 + 30DE    large 14.25 mm    large 14.25 mm

5mm / 5mm Black DRS Wheel Spacer:

• These are hub-centric flat disc type spacers which require the factory hub to center the wheels. Please measure the vehicle hub to verify sufficient height will remain to center the wheel after spacer installation.

10mm / 10mm Black DRS Wheel Spacer:

• Careful attention must be paid to the vehicle hub height and inner wheel bevel measurements. Failure to follow the measurement guidelines below can result in serious damage to wheel spacers, wheels, and mounting hardware.

  
  

15mm / 15mm Black  DRM Wheel Spacer:

• If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel. If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.