Fitment Information
- BMW M8 Competition Convertible F91 (2020, 2021, 2022, 2023)
- BMW M8 Competition Coupe F92 (2020, 2021, 2022, 2023)
- BMW M8 Competition Gran Coupe F93 (2020, 2021, 2022, 2023)
- BMW M8 Convertible F91 (2020, 2021, 2022, 2023)
- BMW M8 Gran Coupe F93 (2020, 2021, 2022, 2023)
Specs & Features
- Bolt Pattern: 5/112
- Center Bore: 66.5
- Bolt or Stud: Bolt
- Thread Type: 14x1.25
- Sold as a pair
- Available in multiple styles
- DR Series
- DR Series spacers fit between the wheel and hub, and require longer wheel bolts (ordered separately.) Please verify bolt specifics before ordering (taper or round bolt head and shaft length.)
- DRA Series
- DRA Series spacers bolt to the hub with special wheel bolts (included) and provide new threaded holes for the existing wheel bolts.
Product Description
Wider is Better! H&R TRAK+ Wheel Spacers move your wheels and tires outwards so they are more flush with the fender‚ instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With TRAK+ you can fill the gap in your fenders and GO WIDE!
TRAK+ Wheel Spacers are manufactured from a special proprietary alloy specifically developed for H&R that is lighter and has a higher tensile strength than 6061-T6 billet aluminum. H&R TRAK+ Wheel Spacers are hubcentric and feature a full contact hub‚ just like the factory hub‚ for even load force distribution and lateral support.
Additional Note 1
DRS 5mm Wheel Spacers- These are hub-centric flat disc type spacers which require the factory hub to center the wheels. Please measure the vehicle hub to verify sufficient height will remain to center the wheel after spacer installation.
Additional Note 2
DRM 20mm Wheel Spacers- If the depth of the wheel spacer is smaller than the length of the standard studs, the wheels used must allow for small cavities in the mounting pad of the wheel. If using wheels without cavities, the standard studs should be shortened so that they do not extend beyond the height of the spacer.
Additional Note 3
DRS 20mm Wheel Spacers- Careful attention must be paid to the vehicle hub height and inner wheel bevel measurements. Failure to follow the measurement guidelines below can result in serious damage to wheel spacers, wheels, and mounting hardware.
Additional Note 4
All DR-Systems require longer wheel bolts. These must be ordered separately. When ordering wheel bolts, please follow these guidelines:
a) If possible, name the brand of wheel.
b) New bolts must be longer than the original bolts by the width of the wheel spacer used.
c) The bolt head must be identical to the existing bolt: Taper 60 End digit 01 Round head for M12/d24 mm, for M14/d28 mm End digit 02 Round head for M12/d26 mm (e.g. OE VAG-wheels) End digit 03 Flat head for Porsche original wheels M14 x 1.5 End digit 06
d) Safety guidelines (Minimum number of turns for wheel bolts / nuts): M12 x 1.25 = 8.0 turns = approx. 10 mm of load bearing shaft length M12 x 1.50 = 6.5 turns = approx. 10 mm of load bearing shaft length M12 x 1.75 = 6.5 turns = approx. 12 mm of load bearing shaft length M14 x 1.25 = 9.0 turns = approx. 12mm of load bearing shaft length M14 x 1.50 = 7.5 turns = approx. 12 mm of load bearing shaft length 1/2" UNF = 8.0 turns = approx. 11 mm of load bearing shaft length
e) Please ensure that the wheel bolts do not damage any part of the brake system (ABS sensors, etc..) Turn the wheel by hand and check clearance on the inside of the hub. The wheel should rotate freely. (Maximum tolerance for some vehicles is only 2mm- i.e., Rear Axle Mercedes.)
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.More in this category
BMW M8 Parts
BMW M8 Wheel Spacers
H&R Wheel Spacers
Reviews on this product
Ordering from Redline360
Redline360 is an Authorized Dealer so we only sell authentic and genuine parts and accessories.
Order updates, tracking and info
Our goal is your complete satisfaction. Upon ordering, you will receive an email confirmation of your order along with your invoice. You will be able to log into our website 24/7 to check on your order at any time. Your order is processed Monday through Friday from 8am to 6pm PST as soon as it is placed. Once your order ships, we will email you a tracking number so you can track your package.
Protect your purchase
Redline360 offers our customers piece of mind! We have partned with Extend to offer you Extend Product Protection and Extend Shipping Protection. Read about each protection that Extend offers to Redline360 customers!
Multiple distribution points ready to serve you!
We ship from multiple locations around the United States so you receive your part as quick as possible. Not every warehouse stocks all the same parts, so the closest warehouse to you that has the part in stock is where your order will ship from. We ship from California, Nevada, Indiana, Michigan, Florida, Texas and Pennsylvania.
Secure Ordering
We take security seriously! We are never exposed to your credit card information, and it's never stored. Credit card transactions go through the credit card processor directly. We also offer various other payment methods such as PayPal, Affirm Financing (Pay over time), Amazon Pay, Apple Pay and more!
Any non CARB compliant items can not ship California. We will notify you if we have to cancel your order.
Some products may be subject to local rules, laws and regulations in certain areas. Always check your local laws to determine legal restrictions. We are not responsible if you buy a product that is not legal in your area.
For items that have free shipping, free shipping only applies to the lower 48 states.
Questions? Contact us.
Actual item may vary from picture