TEIN Flex Z Coilovers Honda S2000 AP1/AP2 (2000-2009) VSH64-C1SA3-C

Fitment Information

• Honda S2000 AP1 F20C 2.0L RWD (2000, 2001, 2002, 2003)
• Honda S2000 AP2 F22C 2.2L RWD (2004, 2005, 2006, 2007, 2008, 2009)
• Honda S2000 CR AP2 F22C 2.2L RWD (2008, 2009)

Fitment Note: Fits all S2000 variants including the AP1, AP2, and S2000 CR across the full 2000-2009 production run. The S2000 uses double wishbone suspension front and rear. 

Lowering Ranges

• Honda S2000 AP1 and AP2 (2000-2009)
• Lowers 0.2" to 4.6" Front
• Lowers 0.1" to 4.2" Rear
• The wide rear lowering range gives buyers significant flexibility but the aggressive end of the range may require alignment correction beyond what OEM adjusters can achieve.

Specs & Features

• 16 Way Adjustable
• Full length ride height adjustment
• Includes Upper Mounts
• Spring Rates: 560 lb Front and 175 lb Rear
• Includes a full set of 4
• 12 Month Warranty
• Genuine TEIN
• Upper mounts on this kit are reinforced rubber at all four corners and do not provide camber adjustment. Buyers who need rear camber correction after lowering will need a separate adjustable rear camber kit.
• Damping is adjustable across 16 stages of simultaneous compression and rebound.
• TEIN EDFC (Electronic Damping Force Controller) is compatible with this kit and expands in-car damping adjustment to 32 or 64 stages depending on the EDFC unit chosen. EDFC is sold separately.
• Dampers are sealed units that are not rebuildable. Replacement cartridges are available from TEIN when dampers need replacing.
• TEIN ZT Coating provides multi-layer rust protection.
• A professional wheel alignment is required after installation. 

OEM Part Numbers

• Front Strut Driver (Left): Honda 51605-S2A-013
• Front Strut Passenger (Right): Honda 51606-S2A-013
• Rear Shock Driver (Left): Honda 52620-S2A-013
• Rear Shock Passenger (Right): Honda 52610-S2A-013

These OEM part numbers apply across the full AP1 and AP2 production run from 2000 through 2009, including the S2000 CR. A single set of part numbers covers all years and variants with no production split. Buyers can verify using the Honda parts catalog at parts.honda.com with their VIN.

Pairs well with:

• TruHart Rear Camber Kit Honda S2000 AP1/AP2 (2000-2009) TH-H221 Adjustable rear camber arms to correct rear geometry after lowering, since the S2000 rear double wishbone does not have sufficient OEM camber adjustment range for aggressive drops.
• Eibach Front and Rear Sway Bars Honda S2000 AP1/AP2 (2000-2009) 4043.320 A 32mm front and 29mm rear sway bar upgrade to reduce body roll and complement the coilovers for a more complete handling improvement on the AP1 and AP2.

Note: Image is only a representation of the coilovers.  TEIN doesn't have vehicle specific images.  Your coilover will be specific to your vehicle.  If you have any questions about this kit, please contact us.

Product Description

TEIN Flex Z Coilovers are the latest in TEIN's generation of high end coilovers.  The difference with Flex Z is that you are getting a coilover that would normally cost almost double the price.  The new manufacturing systems that TEIN has put in place with this line of coilovers has allowed for them to produce these coilovers at a lower price and pass that savings on to you.  Quality and performance remains top of it's class and TEIN builds these Flex Z coilovers with the highest quality standards.

TEIN Flex Z has an awesome twin tube internal system that gives you one of the best street rides we've seen.  In addition, the full length height adjustment system enables you to lower the car to the max allowable level and still maintain the same shock travel and ride quality. 

TEIN Flex Z is 16 way dampening adjustable (compression and rebound together) so you can made the ride stiffer or softer depending on what you are looking to achieve.  For example, you can set the dampening to a low setting for when you are daily driving the car and set it up to a stiffer/firmer setting for track or competition use. 

These coilovers include upper mounts for each installation.  Each kit comes with either reinforced rubber upper mount or a pillowball upper mount.  Pillow ball upper mounts are for strut suspensions and include front camber adjustment.

TEIN takes pride in their products and each one is built to be the best quality possible.  TEIN coats each Flex Z with "ZT Coating" that prevents rust and has multiple layers to ensure the best finish. 

TEIN Flex Z Coilovers Specs and Features:

• Twin-Tube for Comfortable Street Ride
  
• Full-Length System for Height Adjustment with minimal change in ride quality even at lowest setting
• EDFC Compatible
• Includes Upper Mounts for Easy Installation (some vehicles use OE mounts)
• Includes Dust Boots (some vehicles use OE dust boots)
• TEIN Quality for durability, reliability and rust proofing
• No-Sag Springs