SuperPro adjustable front sway bar end links replace the factory links on the 2018-2023 Kia Stinger with a heavy-duty 6060-T5 alloy set offering 300-345mm of length adjustment.
Fitment Information
- Kia Stinger CK RWD (2018, 2019, 2020, 2021, 2022, 2023)
- Kia Stinger CK AWD (2018, 2019, 2020, 2021, 2022, 2023)
Fitment Note
- Front suspension only
- Includes two front sway bar end links
- SuperPro catalogs this application according to the factory end-link dimensions.
- Lowered suspension, altered ride height or aftermarket coilovers can change the required end-link length.
- Some coilovers relocate the sway bar mounting tab. Measure the required center-to-center length before ordering if the factory mounting position has been changed.
- For the matching rear SuperPro end links, use part number TRC1245A.
Specs and Features
- Part Number: TRC12245
- Position: Front
- Quantity: Set of two links
- Adjustment Range: 300-345mm
- Ball-Joint Stud Size: 12mm
- Link Material: 6060-T5 alloy
- GTIN/EAN: 09317745767039
- Heavy-duty adjustable construction
- Low-friction ball joints
- Spanner provision allows adjustment while installed
- Can be adjusted to help position the sway bar neutrally at normal ride height
- Works with factory and compatible adjustable sway bars
- Suitable for stock-height, lowered or raised vehicles when the required length falls within the available range
- SuperPro USA limited lifetime warranty
Product Description
SuperPro TRC12245 front sway bar end links provide an adjustable connection between the front struts and sway bar on the Kia Stinger. The 300-345mm adjustment range allows the link length to be set for the vehicle’s suspension height and sway bar position.
Adjustable end links are especially useful when installing lowering springs, coilovers or an adjustable sway bar. Changing ride height can alter the sway bar’s resting position and place unwanted preload into the bar. Correctly adjusted end links allow both sides to connect without forcing the sway bar out of its neutral position.
The links use 6060-T5 alloy center sections with 12mm ball-joint studs. A spanner provision allows the length to be adjusted while the links are installed. This kit contains two links for the complete front axle.
Why Adjustable End-Link Length Matters
Sway bar preload can occur when one end link has to be forced into position while the vehicle is sitting at its normal ride height. This can make the suspension react differently during left and right turns.
The SuperPro links can be adjusted between 300mm and 345mm to match the suspension setup. Length is measured from the center of one ball-joint stud to the center of the other. Both links should be adjusted according to SuperPro’s installation instructions with the suspension at its normal operating height.
Before You Buy
- Confirm that your required front end-link length falls between 300mm and 345mm.
- Measure center to center between the sway bar and strut mounting points.
- Check whether aftermarket coilovers have relocated the sway bar mounting tabs.
- Do not select an end link only because the vehicle is lowered. The required length depends on the actual mounting-point locations.
- Read the SuperPro fitting instructions before setting the final length.
- Recheck all mounting hardware after the initial break-in period according to the installation instructions.
Pairs Well With
- SuperPro Rear Sway Bar End Links TRC1245A - Completes the adjustable end-link setup at the rear of the Stinger.
- Eibach Front and Rear Sway Bars - Adjustable anti-roll bar set for compatible Kia Stinger models.
- Function & Form Type 4 Coilovers - Height-adjustable suspension that may benefit from adjustable sway bar end-link length.
About SuperPro
SuperPro develops sway bars, adjustable end links, control arms and polyurethane suspension components for street, performance and off-road vehicles. The company is based in Brisbane, Australia, where its suspension products are engineered and tested. Redline360 is an authorized SuperPro dealer.
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.More in this category
KIA Stinger Parts
Superpro Sway Bar End Links
Reviews on this product
Redline360 is an Authorized Dealer so we only sell authentic and genuine parts and accessories.
Order updates, tracking and info
Our goal is your complete satisfaction. Upon ordering, you will receive an email confirmation of your order along with your invoice. You will be able to log into our website 24/7 to check on your order at any time. Your order is processed Monday through Friday from 8am to 6pm PST as soon as it is placed. Once your order ships, we will email you a tracking number so you can track your package.
Protect your purchase
Redline360 offers our customers piece of mind! We have partned with Extend to offer you Extend Product Protection and Extend Shipping Protection. Read about each protection that Extend offers to Redline360 customers!
Multiple distribution points ready to serve you!
We ship from multiple locations around the United States so you receive your part as quick as possible. Not every warehouse stocks all the same parts, so the closest warehouse to you that has the part in stock is where your order will ship from. We ship from California, Nevada, Indiana, Michigan, Florida, Texas and Pennsylvania.
Secure Ordering
We take security seriously! We are never exposed to your credit card information, and it's never stored. Credit card transactions go through the credit card processor directly. We also offer various other payment methods such as PayPal, Affirm Financing (Pay over time), Amazon Pay, Apple Pay and more!
Any non CARB compliant items can not ship California. We will notify you if we have to cancel your order.
Some products may be subject to local rules, laws and regulations in certain areas. Always check your local laws to determine legal restrictions. We are not responsible if you buy a product that is not legal in your area.
For items that have free shipping, free shipping only applies to the lower 48 states.
Questions? Contact us.
Actual item may vary from picture