SPC 66045 Front Upper Control Arm Dodge Challenger / Charger / Chrysler 300 (2009-2023) Camber +/-2° Caster +/-1°, Sold Individually

Fitment Information

• Dodge Challenger 3.6L V6 / 5.7L Hemi / 6.2L Hellcat / 6.2L Hellcat Redeye / 6.4L 392 Scat Pack (2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023) RWD
• Dodge Charger 3.6L V6 / 5.7L Hemi / 6.2L Hellcat / 6.2L Hellcat Redeye / 6.4L 392 Scat Pack (2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023) RWD
• Chrysler 300 / 300C / 300S (2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023) RWD
• Note: Sold individually, one arm per purchase. Two arms required for a complete front end correction, one per side
• Note: Same arm fits both driver and passenger sides

Fitment Note: This arm fits all RWD Challenger, Charger, and Chrysler 300 models from 2009 through 2023 across every trim and engine. Sold individually, so add a quantity of 2 at checkout if you're doing both sides. The same arm works left and right. A full alignment is required after installation.

Specs and Features

• SPC Part Number: 66045
• Sold individually, one arm per purchase, two required for a complete front correction
• Same arm fits both driver and passenger sides
• Position: Front Upper
• Camber adjustment range: +/- 2.0 degrees
• Caster adjustment range: +/- 1.0 degree
• Adjustable ball joint included, low-profile design
• Ball joint is replaceable when it wears out, unlike the factory arm which has to be replaced entirely
• Fully forged tubular steel construction
• Black powder coat finish
• Direct bolt-in replacement at the factory upper control arm mounting points
• Corrects front camber and caster on lowered LC platform cars where the factory cradle has no more adjustment left

The LC platform Challenger, Charger, and 300 don't give your alignment shop much to work with from the factory cradle once the car is lowered. The eccentric bolt adjustment runs out pretty fast, and when it does you're stuck with whatever camber the geometry gives you. That's where this arm comes in. You get +/- 2 degrees of camber and +/- 1 degree of caster adjustment at the front upper arm position, which is enough to get the front end sorted on most street builds. One thing to sort before checkout: these are sold one arm at a time. If you're doing both sides, add two to your cart.

Pairs well with:

• Godspeed Rear Upper Camber Arms for Dodge Charger / Challenger (2006-2023) The SPC arms sort out front camber and caster. If your car is lowered, the rear is going to need attention too. The Godspeed rear upper arms give your alignment shop something to work with at the back end so you're not leaving the shop with one end corrected and the other still out of spec.

OEM Part Numbers Cross Reference

• 4782799AD (Front Upper Control Arm, Driver Side, 2009-2023 Dodge Challenger / Charger / Chrysler 300 RWD)
• 4782800AD (Front Upper Control Arm, Passenger Side, 2009-2023 Dodge Challenger / Charger / Chrysler 300 RWD)

The OEM part numbers above apply to the factory front upper control arms on the LC platform Challenger, Charger, and 300. Confirm your specific factory part numbers using your VIN at a Dodge or Chrysler dealer if needed. The SPC 66045 replaces one arm per purchase and can be installed on either side.

Description

This adjustable front control arm fits these popular Dodge and Chrysler vehicles and provides both camber and caster changes. Easy to install and even easier to adjust this is the perfect kit for standard alignment issues as well as special suspension tuning problems that occur when you lower these vehicles for performance or appearance. Our fully forged design incorporates our low profile adjustable ball joint. These arms fit both the left and right side.