Rev9 Hyper Street II Coilovers for Lexus NX200t / NX300 / NX300h AZ10 (15-21) 32-Way

Lower your first-generation Lexus NX and give it a more controlled feel with these Hyper Street II coilovers from Rev9. This complete kit replaces the factory springs and shocks while adding adjustable ride height and 32 levels of rebound adjustment.

The 8K front and 7K rear spring rates help reduce body roll and the softer factory suspension feel without making the NX impractical for regular street driving. You can keep the dampers closer to the soft side for daily use or firm them up when you want a tighter response.

Fitment Information

• Lexus NX200t (2015, 2016, 2017)
• Lexus NX300 (2018, 2019, 2020, 2021)
• Lexus NX300h Hybrid (2015, 2016, 2017, 2018, 2019, 2020, 2021)
• First-generation Lexus NX AZ10 platform
• Fits applicable FWD and AWD models

Fitment Notes

• Rev9 lists this kit for all trims
• This is a lowering coilover kit and is not designed to maintain or raise the factory ride height
• Approximate adjustment range is 1 to 3 inches below factory ride height
• Front and rear pillowball mounts are included, but this application does not include adjustable camber plates
• If your NX has Adaptive Variable Suspension, contact us before ordering to confirm how the factory electronic damping system should be handled

Specs & Features

• Rev9 Hyper Street II coilover suspension kit
• 32-way rebound adjustment from soft to firm
• Full-length ride-height adjustment
• Ride height can be adjusted separately from spring preload
• Monotube damper design
• Front spring rate: 8 kg/mm or 448 lb/in
• Rear spring rate: 7 kg/mm or 392 lb/in
• Front spring length: 200mm
• Rear spring length: 210mm
• Front spring inner diameter: 62mm
• Rear spring inner diameter: 62-74mm
• Front pillowball upper mounts
• Rear pillowball upper mounts
• Steel-alloy construction with aluminum hardware
• One-year Rev9 parts warranty when purchased through Redline360

What’s Included

• Two front Rev9 coilover assemblies
• Two rear Rev9 shocks and springs
• Front and rear upper mounts
• Ride-height adjustment hardware
• Spanner wrenches

Installation

Set the final ride height before having the vehicle aligned. Lowering the NX will change its camber and toe settings, so a professional four-wheel alignment is required after installation. Check wheel, tire and suspension clearance through the complete steering and suspension range before driving.

Pillowball mounts provide a more direct suspension connection than the factory rubber mounts, so some additional road and suspension noise inside the cabin is normal.

Pairs Well With

• Godspeed Adjustable Front Sway Bar End Links - Adjustable end links help remove sway-bar preload after lowering your Lexus NX and let you set the link length around the new ride height.

About Rev9

Rev9 makes affordable performance parts for street-driven import vehicles. The Hyper Street II line is for drivers who want adjustable ride height and damping without spending significantly more on a track-focused suspension setup. Redline360 is an authorized Rev9 dealer, so the included manufacturer warranty remains valid.