ReadyLIFT Leveling Kit Chevy Silverado / GMC Sierra 1500 (2007-2017) 2.25" Front

Fitment Information

• Chevy Silverado 1500 (2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017) 
• GMC Sierra 1500 (2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017) 

Note:

NOTE: Check factory height prior to ordering or installing. Trucks with more than 22’’ of ‘wheel hub to fender lip’ height may require less lift.

1/2" front wheel spacers may be required to run a 285 or larger tire on factory wheels.

**Not for 2017 models w/ stamped steel upper control arms. Please see note in description.**

Specs & Features

• Max Lift 2.25" - Max Tire Diameter 33"
• Will work on 2015-18 Silverado/Sierra 1500
• Best quality, best design for the proper leveling lift on new body style GM 1500 trucks
• CNC machined aircraft 6061-T6 billet construction
• Not for use with vehicles equipped with factory Air-Ride.
• Vehicles equipped with Magnetic Ride Control will require re-calibration.

Product Description

Some vehicles may require the use of 15-3485 1/2" front wheel spacer when using factory wheels. The factory wheel options and difference in backspacing vary. In order to run a 285 or larger tire on the factory wheels, you may be required to use our 1/2" wheel spacers in front.

ReadyLIFT is the most cost-effective and time-efficient way to lift your 2007-2017 GM Silverado / Sierra 1500 6-lug new body style pickup ride height by lifting the front 2.25". ReadyLIFT 66-3085 products do not require any permanent modification to factory parts and never compresses the factory springs or require cutting the strut studs. ReadyLIFT leveling kit systems will not affect your factory OEM ride quality or comfort level. The 66-3085 kit includes two (2) Aluminum SST Strut Extensions and two (2) Aluminum SST Lower Strut Mount Spacers along with all necessary hardware. These are CNC-machined 6061-T6 solid billet Aluminum construction, not spot welded low grade stamped steel often found with cheaper quality kits.

NOTE: This kit will work on new 2015-2018 GM 1500 Trucks! If your truck is a 2017 with stamped steel upper control arms, this kit will require either aftermarket upper control arms -or- the purchase of the Aluminum factory upper control arms. The stamped steel control arms on the 2017 models are known to have issues with ball-joints becoming compromised when leveling or lifting the suspension.

NOTE: To ensure proper leveling kit fitment, using a plumb bob line (for a clean vertical) to measure from the center of the wheel hub to the bottom edge of the fender at the 12 o’clock position while the wheels are pointing straight forward. If this measurement is greater than 22’’ then the truck already has some factory or aftermarket front lift compared to a base truck. For distances measuring greater than 22’’ as described above, #66-3086 or #66-3085 should be modified to account for the pre-installed lift. To ensure proper front lift height and suspension geometry, install the ReadyLIFT leveling kit WITHOUT the lower horseshoe spacer. Incorrectly using these kits on a truck with 22’’ or more distance may result in component interference and/or excessive wear.

Some vehicles may require the use of 15-3485 1/2" front wheel spacer when using aftermarket tires on some factory wheels. The factory wheel options and difference in backspacing vary.

Redline360 sells only new, genuine and authentic ReadyLIFT products.

SAEJ2492 Warning: By installing this product, you acknowledge that the suspension of this vehicle has been modified. As a result, this vehicle may handle differently than that of factory-equipped vehicles. As with any vehicle, extreme care must be used to prevent loss of control or roll-over during sharp turns or abrupt maneuvers. Always wear seat belts, and drive safely, recognizing that reduced speeds and specialized driving techniques may be required. Failure to drive this vehicle safely may result in serious injury or death. Do not drive this vehicle unless you are familiar with its unique handling characteristics and are confident of your ability to maintain control under all driving conditions. Some modifications (and combinations of modifications) are not recommended and may not be permitted in your state. Consult your owner’s manual, the instructions accompanying this product, and state laws before undertaking these modifications. You are responsible for the legality and safety of the vehicle you modify using these components.

Please read Instructions thoroughly and completely before beginning installation. Installation by a certified mechanic is recommended. Redline360 and ReadyLIFT Suspension Inc. is NOT responsible for any damage or failure resulting from improper installation.