Godspeed MSS0152 MonoSS Coilovers BMW 128i/135i E82 Coupe E88 Convertible RWD (2007-2013) w/ Front Camber Plates

Fitment Information

• BMW 128i E82 Coupe / E88 Convertible RWD, without electronic suspension (2007, 2008, 2009, 2010, 2011, 2012, 2013)
• BMW 135i E82 Coupe / E88 Convertible RWD, without electronic suspension (2007, 2008, 2009, 2010, 2011, 2012, 2013)

Fitment Note: RWD only. Does not fit any E82 or E88 equipped with electronic suspension. To confirm whether your car has electronic dampers, check for a suspension mode button or look up your option codes. The 2007 model year covers early European production cars. Most US-delivered E82/E88 started with the 2008 model year. 

Specs & Features

• 16 way adjustable dampers (soft to firm)
• 7 kg front and 12 kg rear springs
• Includes front camber plates
• Includes a full set of 4.
• Koyo Japan 6204z bearing
• Polyurethane bushing (if applicable)
• Monotube shock design
• Anodized shock body
• Lightweight aluminum shock body and T7075 forged aluminum / carbon steel brackets
• 52mm carbon steel shock body with a performance internal piston
• Independent ride height and spring preload adjustments
• Race shock oil with a high viscosity index
• Part Number: MSS0152-B
• Front camber plates are included with this kit. The E82 uses a MacPherson strut front suspension so the pillow ball camber plates allow front camber adjustment directly through the top mount.
• Before driving after installation, set the spring preload to 5-10mm on all four corners.
• Damping is adjustable across 16 clicks of simultaneous compression and rebound.
• Height is adjusted independently of spring preload via the threaded shock body.
• Factory ride height cannot be achieved with this kit.
• All necessary hardware, adjustment tools, and installation instructions are included.
• A professional wheel alignment is required after installation. 

Pairs well with:

• Whiteline Front Sway Bar End Links BMW 128i/135i E82/E88 (2008-2013) KLC154 Adjustable front endlinks to maintain proper sway bar geometry after lowering. When you drop the E82 the factory endlinks put the sway bar under preload, which reduces its effectiveness. These restore neutral preload at whatever ride height you set.
• Godspeed Front Lower Camber Arms BMW 128i/135i E82/E88 (2007-2013) Front lower camber arms from the same manufacturer to pair with the coilovers. The front camber plates in this kit handle upper camber adjustment and these lower arms add further geometry correction for more aggressive setups.

Frequently Asked Questions

• Do front camber plates come included?
  Yes. The E82 and E88 use MacPherson strut front suspension, so Godspeed includes pillow ball camber plates with this kit. You can adjust front camber directly through the top mount after installation without needing separate camber bolts or additional parts.
• Does this fit my E88 Convertible?
  Yes. The E88 Convertible uses the same front strut and rear shock architecture as the E82 Coupe and is a confirmed fit for the MSS0152. Both body styles are covered across the full 2007-2013 production run.
• What does "set spring preload to 5-10mm before driving" mean?
  After installation and before your first drive, you need to compress each spring slightly by hand to set a 5-10mm preload gap. This ensures the spring is properly seated and prevents any initial clunking or settling as you drive. The Godspeed installation guide walks through this step and it only takes a few minutes per corner. Do not skip it.
• Does this fit my 135is?
  The 135is was a special edition model sold in 2013. It uses the same E82 platform and RWD suspension as the standard 135i and is a confirmed fit for this kit, provided it does not have electronic dampers.

Product Description

GodSpeed MonoSS coilovers are great entry level single adjustable coilovers. GodSpeed starts with a race coilover and tones it down for the street to give you an extremely capable coilover that you can comfortably use every day.  GodSpeed uses some of the best and most exotic components on the market such as a carbon seamless steel 52mm tube with a high performance internal shock piston that provides fast and precise damper response.  GodSpeed coilover springs are cold-bent from high strength SAE9252 steel to be comfortable and high performance.  

A big problem with a lot of entry level coilovers is that they use cheap shock oil, but GodSpeed doesn't follow that philosophy.  Race quality shock oil ensures exceptional damper performance any any temperature, on or off the track.  The GodSpeed coilover top hat uses a high performance Japanese KOYO 6204Z bearing pillowball mount (when applicable).  Bottom shock brackets are also top quality and made from T7075 forged aluminum or carbon steel brackets for light weight and durability.

GodSpeed offers a 1 Year Warranty from date of purchase when purchased from an Authorized Dealer such as Redline360. GodSpeed requires proof of purchase from an authorized dealer.