Bilstein B6 Performance Shocks & Struts Honda CR-V (2007-2011) Front or Rear

BILSTEIN B6 Performance: Better than the original

Fitment Information

• Honda CR-V 3rd Gen LX FWD (2007, 2008, 2009, 2010, 2011)
• Honda CR-V 3rd Gen LX AWD (2007, 2008, 2009, 2010, 2011)
• Honda CR-V 3rd Gen EX FWD (2007, 2008, 2009, 2010, 2011)
• Honda CR-V 3rd Gen EX AWD (2007, 2008, 2009, 2010, 2011)
• Honda CR-V 3rd Gen EX-L FWD (2007, 2008, 2009, 2010, 2011)
• Honda CR-V 3rd Gen EX-L AWD (2007, 2008, 2009, 2010, 2011)
• Honda CR-V 3rd Gen SE AWD (2011)

Fitment Note: This listing covers the front strut (sold as a pair) and rear shock (sold as a pair) for the 3rd generation Honda CR-V across all trims and drivetrain configurations including FWD and AWD. Select the position you need from the dropdown. The B6 Performance is designed to be paired with the factory springs and cannot be used to raise the vehicle or maintain OEM height when combined with lowering springs. Mounting plates are not included and must be sourced separately. Factory shock mounting bolts are reused during installation. An alignment is not required for a direct strut or shock replacement at stock height, but is always recommended after any suspension work.

Specs and Features

• Front Strut Part Numbers: 22-235817 (left/driver), 22-235824 (right/passenger), sold as a pair of 2
• Rear Shock Part Number: 19-235837, sold as a pair of 2
• Designed to pair with factory springs for an OEM-upgrade performance improvement at stock ride height
• Monotube gas-pressure construction for consistent, fade-free damping performance
• Application-specific valve settings calibrated by Bilstein for the 3rd gen CR-V's suspension geometry and weight
• Improves handling precision, body control, and steering response compared to worn or stock-level dampers
• Upper mount type: stem
• Shock absorber design: suspension strut (front), shock absorber (rear)
• Factory hardware included: all necessary washers, bushings, and nuts supplied, factory mounting bolts reused
• Mounting plates sold separately
• Fits FWD and AWD CR-V models
• Bilstein limited lifetime warranty

The B6 Performance sits above the B4 OE Replacement in Bilstein's lineup. The B4 is a direct stock-equivalent replacement. The B6 takes that same build quality and adds application-specific valving that improves body control and handling response beyond what the factory struts delivered when they were new. For a CR-V that gets driven with any enthusiasm or one that you'd like to feel tighter and more planted without lowering it, the B6 is the upgrade that makes sense. It works with your factory springs and doesn't change ride height, so the result is a noticeably better-handling version of exactly what Honda built.

Adjustability & Range

• Fitting Position: Front or Rear Axle
  
• Shock Absorber Type: Gas Pressure
• Upper Mount Type: Stem
• Shock Absorber Design: Suspension Strut
  
• Shock Absorber Mounting Type: Top pin / Bottom Clamp
  
• Shock Absorber System: Twin-Tube

Specs & Features

• Sold Individually
• Better vehicle dynamics in any situation.
• BILSTEIN gas pressure technology
• Optimum grip and enhanced lane stability in day to day and extreme situations
• Improved safety and performance with OE springs
• Precise handling
• BILSTEIN upside-down monotube technology available
• Individually fine-tuned during BILSTEIN road testing

Pairs well with:

• Honda CR-V Lowering Springs Collection The B6 Performance is Bilstein's shock for stock-height vehicles running factory or mild aftermarket springs. If you're looking to lower the CR-V alongside the new shocks, browse the CR-V lowering spring collection for compatible options that these Bilstein struts can handle, since the B6 is capable of working with progressive-rate lowering springs without the additional shock travel compensation needed for more aggressive drops.

OEM Part Numbers Cross Reference

• 51606-SWA-A03 (Front Left/Driver Strut Assembly, 2007-2011 Honda CR-V FWD and AWD)
• 51605-SWA-A03 (Front Right/Passenger Strut Assembly, 2007-2011 Honda CR-V FWD and AWD)
• 52610-SWA-A03 (Rear Left/Driver Shock Absorber, 2007-2011 Honda CR-V AWD)
• 52611-SWA-A03 (Rear Right/Passenger Shock Absorber, 2007-2011 Honda CR-V AWD)

The OEM part numbers above apply to the 2007-2011 Honda CR-V 3rd generation across FWD and AWD configurations. Honda part numbers went through multiple revision suffixes during the CR-V's production run. The -A03 suffix shown is the most commonly referenced current revision, but confirm your specific factory part number using your VIN at a Honda dealer or via Honda's parts reference system if you need to verify before ordering. The Bilstein B6 Performance units are a direct upgrade replacement for these OEM assemblies.

Product Description

BILSTEIN B6.

The BILSTEIN B6 Performance is ideal gas-pressure shock absorber for those who refuse to compromise between performance or comfort.

For shock absorbers heavy loads or trailering are a big challenge. Built to OE quality standards, the BILSTEIN B6 delivers increased performance when demands are high. Even without lowering you will get better vehicle dynamics for a comfortable street performance in town and on the highway.

DRIVE THE LEGEND.

Redline360 sells only new, genuine and authentic Bilstein products.