Bilstein B6 4600 Shocks Toyota Tacoma 3rd Gen (2016-2023) Front or Rear, Stock Height, 6 Lug, 24-265966 / 24-265973

Image for display purposes only. Actual product may vary.

We understand your vehicle's importance, so BILSTEIN creates products you can rely on. With a focus on performance, quality, and safety, BILSTEIN meets the highest standards, backed by a warranty to give you peace of mind and unmatched dependability.

Fitment Information

• Toyota Tacoma SR RWD / 4WD (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023), 6 lug, stock height, without Nivomat
• Toyota Tacoma SR5 RWD / 4WD (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023), 6 lug, stock height, without Nivomat
• Toyota Tacoma TRD Sport RWD / 4WD (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023), 6 lug, stock height, without Nivomat
• Toyota Tacoma TRD Off-Road RWD / 4WD (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023), 6 lug, stock height, without Nivomat
• Toyota Tacoma Limited RWD / 4WD (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023), 6 lug, stock height, without Nivomat
• Toyota Tacoma TRD Pro 4WD (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023), 6 lug, stock height, without Nivomat
• Note: 6 lug wheel configuration only. Not compatible with 5 lug Tacoma models
• Note: For stock height vehicles only. For lifted Tacomas, the Bilstein B8 5100 is the correct choice
• Note: Rear shocks (24-265973) fit 4WD models only. Front shocks (24-265966) fit both RWD and 4WD

Fitment Note: This listing covers the front shock (24-265966) and rear shock (24-265973) for the 2016-2023 Toyota Tacoma on 6 lug wheels, at stock ride height, without Nivomat self-leveling suspension. Select the position you need from the dropdown. The front shock fits both RWD and 4WD Tacomas. The rear shock fits 4WD Tacomas only. These are designed for vehicles running at factory ride height. If your Tacoma is lifted or you plan to lift it, the correct Bilstein replacement is the B8 5100 series, which is ride-height adjustable and valved for lifted applications. Only the lower spring mount is included with hardware. Factory mounting bolts are reused during installation.

Specs and Features

• Front Shock Part Number: 24-265966 (fits RWD and 4WD)
• Rear Shock Part Number: 24-265973 (fits 4WD only)
• Sold as a pair per position (2 shocks per front or rear axle)
• Designed for stock height Tacomas as an OEM-upgrade replacement, does not add lift
• 46mm monotube construction with corrosion-resistant yellow coating and blue boot, the same visual signature as factory Bilstein OE fitments on TRD Pro models
• High gas pressure monotube design eliminates aeration and shock fade under sustained use, including trail driving and towing
• Velocity-sensitive digressive piston reacts to changing road and trail conditions in real time, firm when needed and compliant when not
• Application-specific tuning by Bilstein for the 2016-2023 Tacoma's suspension geometry and weight
• Hardware included: lower spring mount only, factory mounting bolts are reused
• 6 lug fitment only
• Made in the USA
• Bilstein limited lifetime warranty

Adjustability & Range

• Fitting Position: Front (Left or Right) or Rear Axle (Left or Right)
• Shock Absorber Type: Gas Pressure
• Shock Absorber Design:
  • Front: Spring-bearing Damper
    
  • Rear: Absorber does not carry a spring
    
• Shock Absorber Mounting Type:
  • Front: Bottom eye / Top pin
    
  • Rear: Top eye / Bottom yoke
• Shock Absorber System:
  • Front: Single Tube Upside Down
  • Rear: Monotube

Specs & Features

• Sold Individually
• Optimum grip and enhanced lane stability in day to day and extreme situations
• Enhanced safety
• BILSTEIN monotube gas-pressure technology
• Digressive valving instantly reacts to changing road surface conditions for maximum comfort and control on and off-road
• High gas pressure and a longer service life even when pulling trailers or driving off-road
• No spring change required (Use of OE spring possible)
• Individually fine-tuned in the BILSTEIN road test
• Durable vulcanized neoprene rubber bushings

Pairs well with:

• Bilstein B8 5100 Shocks for Toyota Tacoma RWD / 4WD (2016-2023), Front Lift and Rear Leveling Kit If you plan to lift your Tacoma rather than keep it at stock height, the B8 5100 is the right call instead of this B6 4600. The 5100 is ride-height adjustable and valved specifically for lifted applications, while the 4600 is tuned for the factory suspension geometry at stock height.

OEM Part Numbers Cross Reference

• 48510-04241 (OEM Front Shock Absorber, 2016-2023 Toyota Tacoma 4WD TRD Off-Road)
• 48510-04260 (OEM Front Shock Absorber, 2016-2023 Toyota Tacoma standard suspension)
• 48530-09830 (OEM Rear Shock Absorber, 2016-2023 Toyota Tacoma 4WD)

The OEM part numbers above are provided as reference for what the Bilstein B6 4600 units replace on the 2016-2023 Tacoma. Toyota's OEM shock part numbers can vary by trim, drivetrain, and production date. Confirm your specific factory shock numbers using your VIN at a Toyota dealer or via Toyota's parts reference system if you need to verify before ordering.

Product Description

The B6 4600 is the stock-height answer. If your Tacoma is riding at factory height and you want a meaningful upgrade over the original shocks without adding any lift, this is the correct Bilstein for that job. It's the same monotube platform Bilstein supplies to Toyota as OEM equipment on TRD Pro models, which is why you'll see that familiar yellow body and blue boot when you open the box. If you want to lift the truck at the same time, grab the B8 5100 instead since it's adjustable and valved for the geometry changes that come with a lift. Running the 4600 on a lifted Tacoma means the shock travel is not optimized for the new ride height, and you'll notice it.

Bilstein B6 4600 shock absorbers are designed as a direct fit upgrade to OE shock absorbers on stock height light trucks and SUV’s. These shock absorbers feature a monotube design which provides consistent fade free performance. B6 4600 shock absorbers utilize a unique, velocity sensitive, digressive piston which reacts to changing road conditions. All B6 4600 shock absorbers are tuned for each specific application to ensure optimal performance is achieved. B6 4600 shock absorbers offer a significant improvement in ride quality, handling, and comfort.

DRIVE THE LEGEND.

Redline360 sells only new, genuine, and authentic Bilstein products.