Edelbrock AVS2 Carburetor 19064 (650 CFM, Electric Choke, EnduraShine) Non-EGR

Specs

• Metering Rod Size .065 x .047 in
• Includes Gasket: Yes
• Barrel Quantity: 4 Barrel
• Flange Type: Square
• Main Venturi Diameter: 1.19
• Body Height: 3.25
• Bore Diameter: Primary Bore 1.44; Secondary Bore 1.69
• Spring Force: 5" Hg (Orange)
• Warranty: 3 Months
• Choke: Electric 
• Marine Approved: No
• CFM: 650 cfm
• Primary Jet Diameter: 0.086

Install Notes

• Recommended cubic inch displacement for small block dual quad applications is 302-400+ c.i.d.; Recommended cubic inch displacement for big block dual quad applications is 396-502+ c.i.d.; Performer Series Carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000; Edelbrock carburetors are not calibrated for or compatible with alcohol, race or E85 pump fuel. The use of alcohol or E85 in your Edelbrock carburetor will damage your carburetor and void your warranty. These fuels can also damage other fuel system components, unless specifically designed for use with alcohol fuels

Description and Information

The Edelbrock #19064 AVS2 Series EnduraShine 650 cfm carburetor is the next generation in Edelbrock carburetors. Designed and calibrated for optimum street performance in small-block and some big-block engines. The AVS2 features annular flow primary boosters with a new calibration for improved off idle and cruising performance. The annular flow booster design delivers improved fuel atomization to eliminate flat spots that may be encountered when the carburetor transitions from idle to full throttle. Each annular flow booster features eight, equally spaced orifices to improve fuel metering from idle to the main circuit. The improved flow metering makes this carburetor ideal for use with a wide variety of small-block and big-block engines with either dual or single plane intake manifolds. The Edelbrock #19064 AVS2 includes both timed and full vacuum ports for ignition advance. It comes with Metering Jets: Primary .101, Secondary .098; Metering Rods: .070 x .037; Step-Up Spring: Orange (5" Hg). Use our Carburetor Stud Kits #8008 or #8024 if needed. Match with a variety of manifolds that include Edelbrock Performer, Performer EPS, RPM Air-Gap, Performer RPM, Torker II or other brands of similar design.