- Dodge Dakota (2001-2010)
- Flasher Setup: BCM Controlled (resistor only)
- Modern LED appearance with instant on and off
- Direct replacement for Dodge Dakota front turn bulbs
- Plug and play, no modification with factory 3157 bulb size
- Multiple brightness levels available
- Operating Voltage: 9-16V Connector(s): OEM-Size Plug and Play
LED Indicators. The factory incandescent turn signals on the Dodge Dakota illuminate in a slow glow, taking a moment to turn off and on. With replacement LED bulbs, you can immediately update your vehicle with the instant on-off blinking of modern LEDs. This instant activation adds a modern and distinct look to the Dakota.
Dual Brightness. The Dakota uses a 3157 dual-filament bulb. They light up with low power as parking lights, then they get brighter when the turn signal or hazards are activated. The brightness ratio of your factory bulbs is traditionally 15:100, or 15% lumen output for the dim function. Diode Dynamics bulbs are designed to match this, so there is enough distinction between "low" and "high" brightness levels. As with all Diode Dynamics LED bulbs, these turn signal bulbs are rated with accurate, measured lumen figures, not calculations or guesses.
Switchback. The dual-filament function of your factory turn signal bulbs gives you the ability to choose a unique LED bulb model: switchback! These bulbs illuminate in a bright white for the "low" power setting for your running/parking light, then switch to intense amber when the turn signals are activated. When the turn signal is switched off, they return to the original white output. The result is a modern dual-color effect, as seen on many high-end vehicles on the road. Please note: in order to properly see the white, you must have clear reflectors/lenses over the turn signal bulb. If your Dakota has amber reflectors, you might be able to find clear aftermarket ones to complete this upgrade!
Reduced Load. When it comes to LED upgrades, you'd think the lower power draw would be a great feature! However, the Dakota looks for a specific power draw from the turn signals. LEDs will make the vehicle think a bulb has gone out, due to lower power draw. This causes a "hyperblink," or fast-blinking turn signal, which can be corrected with LED Resistors or an LED Flasher.
The most basic, tried-and-true method to correct hyperblinking is to add resistors. These can be used on any vehicle, because a 6-ohm resistor uses about the same power as a standard turn signal bulb. One resistor is needed to replace each turn signal bulb.
You may have also heard of flasher relays, which is the actual module that determines flash speed. On some vehicles, it can be replaced with one that is designed for LED power levels. However, on many newer vehicles these modules cannot be replaced. If it's possible to replace the flasher on the Dakota, you'll see one listed above. Only one flasher is needed per vehicle, for both front and rear LED turn signal conversions.
Reliability. Diode Dynamics LEDs are built with constant-current inductive circuitry, along with transient suppression. They are tested by our engineering team with a device that replicates years of voltage spikes, like the ones generated each time the alternator starts and stops on your Dakota. This is what kills most LED bulbs over time, but just like factory components, Diode Dynamics LEDs are designed with built-in circuit protection. While more expensive than simple bulbs, this allows Diode Dynamics LEDs to last for years, with no flickering or failure.
Experience. After over a decade in business, Diode Dynamics is one of the most trusted names in automotive LED lighting. We directly assemble and engineer our own products in the United States, allowing for higher quality and performance, with the newest and brightest LED technology. Whether it's a Dodge or anything else, we pride ourselves in offering only the best possible LED solutions. Please contact us if you'd like to discuss your lighting project!
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
More in this category
Diode Dynamic Turn Signal Kit
Dodge Dakota Parts
Reviews on this product
Ordering from Redline360
Redline360 is an Authorized Dealer so we only sell authentic and genuine parts and accessories.
Order updates, tracking and info
Our goal is your complete satisfaction. Upon ordering, you will receive an email confirmation of your order along with your invoice. You will be able to log into our website 24/7 to check on your order at any time. Your order is processed Monday through Friday from 8am to 6pm PST as soon as it is placed. Once your order ships, we will email you a tracking number so you can track your package.
Protect your purchase
Redline360 offers our customers piece of mind! We have partned with Extend to offer you Extend Product Protection and Extend Shipping Protection. Read about each protection that Extend offers to Redline360 customers!
Multiple distribution points ready to serve you!
We ship from multiple locations around the United States so you receive your part as quick as possible. Not every warehouse stocks all the same parts, so the closest warehouse to you that has the part in stock is where your order will ship from. We ship from California, Nevada, Indiana, Michigan, Florida, Texas and Pennsylvania.
We take security seriously! We are never exposed to your credit card information, and it's never stored. Credit card transactions go through the credit card processor directly. We also offer various other payment methods such as PayPal, Affirm Financing (Pay over time), Amazon Pay, Apple Pay and more!
Any non CARB compliant items can not ship California. We will notify you if we have to cancel your order.
Some products may be subject to local rules, laws and regulations in certain areas. Always check your local laws to determine legal restrictions. We are not responsible if you buy a product that is not legal in your area.
For items that have free shipping, free shipping only applies to the lower 48 states.
Questions? Contact us.
Actual item may vary from picture