{"product_id":"1990-1995-toyota-4-runner-2nd-gen-adjustable-trailing-arms","title":"APOC Adjustable Trailing Arms for Toyota 4Runner 2nd Gen (1990-1995) Fits Stock to 6\" Lift","description":"\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eFitment Information\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eToyota 4Runner 2nd Gen, all trims and drivetrains (1990, 1991, 1992, 1993, 1994, 1995)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment Note:\u003c\/strong\u003e This kit fits all 2nd generation Toyota 4Runner models from 1990 through 1995, covering both 2WD and 4WD configurations. The 2nd gen 4Runner uses a solid front axle and a solid rear axle, and these trailing arms locate the rear axle. If you are also lifting this truck, the adjustable track bar add-on in the dropdown is strongly recommended alongside these arms, since lifting a solid axle vehicle also shifts the axle laterally and an unaddressed track bar length will cause the axle to sit off-center, which creates dog tracking, brake pull, and in more extreme cases, death wobble. Use silicone-based grease with PTFE additives when lubricating the polyurethane bushings, do not use petroleum-based grease as it will degrade the bushing material. Sold as a pair of 2 trailing arms. Factory hardware is reused, an optional metric 10.9 upgrade hardware kit is available in the dropdown.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003eSpecs and Features\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSold as a pair of 2 adjustable trailing arms\u003c\/li\u003e\n\u003cli\u003eAdjustable from stock length to 2.5 inches longer when fully extended, supporting lifts from stock up to 6 inches\u003c\/li\u003e\n\u003cli\u003eHeavy-duty DOM (Drawn Over Mandrel) steel tubing construction for superior strength over factory stamped steel\u003c\/li\u003e\n\u003cli\u003ePTMEG-based polyurethane bushings for a firmer, more responsive feel than rubber without the harshness of heim or flex joints, ideal for daily driving and moderate off-road use\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on polyurethane bushings\u003c\/li\u003e\n\u003cli\u003eGrease fittings on each bushing for ongoing maintenance and long bushing life\u003c\/li\u003e\n\u003cli\u003eIntegrated brake line brackets included, clean factory-style cable routing with no zip ties needed\u003c\/li\u003e\n\u003cli\u003eUses factory mounting hardware, optional metric 10.9 hardware upgrade kit available in the dropdown at checkout\u003c\/li\u003e\n\u003cli\u003eOptional adjustable track bar available as a dropdown add-on, strongly recommended for lifts over 2 inches\u003c\/li\u003e\n\u003cli\u003ePowder coated finish\u003c\/li\u003e\n\u003cli\u003eDesigned, machined, and manufactured in East Tennessee, USA\u003c\/li\u003e\n\u003cli\u003eEstimated install time: 3-4 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003cp\u003eApoc Toyota 4Runner adjustable Trailing Arms are a significant upgrade from stock; factory Control Arms work great with factory-sized tires. Once you go bigger, you need more robust and longer control arms to maintain correct handling. Apoc Toyota 4Runner Trailing Arms are built to support proper suspension geometry to keep your rig handling like stock but better. When adding any lift to your Toyota 4Runner, you change your drive line angles, creating drive line vibrations and u-joint failure. Big tires and lifts look great, but don't sacrifice reliability; upgrade your Control Arms and drive easily. Adjustable Controls arms are fully adjustable from stock to 6\" of lift, so if you're just starting with a mild lift for now but upgrading later, these arms will suit your needs as you add more lift over time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eParts Included: \u003cspan style=\"color: #07ce07;\"\u003e( option hardware kit includes all Metric 10.9 flange bolts and lock washers)\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 Upper Control Arms\u003c\/li\u003e\n\u003cli\u003e2 Lower Control Arms\u003c\/li\u003e\n\u003cli\u003eTop Quality Polyurethane Bushings\u003c\/li\u003e\n\u003cli\u003eBushing Ends DOM Tubing \u003c\/li\u003e\n\u003cli\u003eUses Factory Hardware\u003c\/li\u003e\n\u003cli\u003eGrease Fitting For Each Bushing For Long Life\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe factory trailing arms on a 2nd gen 4Runner are fixed length, which works fine at stock height. The moment you start lifting the truck, those arms hold the rear axle at an angle that changes your pinion angle and throws off the geometry the factory u-joints were designed to handle. That's where the driveline vibration and premature u-joint failure come from on lifted rigs still running stock trailing arms. These arms are adjustable from stock length all the way up to about 2.5 inches longer, covering lifts from stock to 6 inches. If you're adding the optional adjustable track bar at the same time, which you should be if you're going more than 2 inches of lift, the dropdown on this listing has you covered. APOC also supplies setup instructions and resources for dialing in the correct length for your specific lift height so you're not guessing.\n\u003c\/p\u003e","brand":"Apoc Industries","offers":[{"title":"Default Title","offer_id":42756882956368,"sku":"9-508","price":413.62,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0058\/0252\/4785\/files\/1990-1995-Toyota-4-Runner-2nd-gen-Adjustable-Trailing-Arms-Apoc-Industries-54709973.jpg?v=1782845977","url":"https:\/\/shop.redline360.com\/products\/1990-1995-toyota-4-runner-2nd-gen-adjustable-trailing-arms","provider":"Redline360","version":"1.0","type":"link"}